 |
 |
 |
 |
|
 |
|
Features
Construction
The polished stainless steel housing rests on a powder-coated heavy steel frame that provides anti-rust and corrosion protection to the Livietta T2. The unit measures 12.5"H x 8.5"W x 14.3"D and weighs 23 lbs.
Controls
The Pasquini Livietta T2 is simple to operate with its 3 clearly labeled switches on front of the machine. One switch controls the power, the other controls brewing and the third one controls steaming.
Commercial Grade Portafilter and Brew Group
The commercial grade portafilter of the Livietta T2 is made of solid marine grade brass- an exceptional heat conductor to maintain the proper brewing temperature for espresso. It is then chrome plated for the ultimate corrosion resistant and easy-to-clean surface. The portafilter comes with two pressed stainless steel filter baskets (a single shot and double shot basket) each measuring 57mm in diameter. A professional machine by tradition, The Pasquini Livietta T2 offers a rugged brew group constructed of chrome-plated marine brass. Its design allows the brew group to conduct heat from the thermoblock to retain the temperature and flavor of espresso.
Dual Thermoblock Heating System
The dual thermoblock heating system results in constant supply of espresso as well as steam, anytime you want. It takes only 2 minutes for the machine to reach brewing temperature, and only 4 minutes to reach steaming temperature. So you can create a number of different drinks without any wait.
3-Way Solenoid Valve
The Pasquini Livietta T2 features a built-in 3-way solenoid valve that relieves water pressure at the end of the brewing cycle. The 3-way solenoid valve is activated, when you turn off the brew switch. It eliminates excess water in the grouphead and avoids dripping or spattering when the portafilter is removed.
Steam Wand
Thanks to the machine’s powerful 15 bar pump and dual thermoblock system, the Livietta T2 is ready to deliver steam anytime. The steam wand, made of stainless steel is located on the left side of the machine. Simply press the steam button above the wand and create foam for cappuccino, latte, macchiato or hot cocoa.
Hot Water
The Pasquini Livietta T2 does not come with built-in hot water dispenser but hot water is still available for your hot chocolate, or americano just at the push of a button. The brewing button will dispense hot water through the grouphead when there is no coffee prepared in the portafilter.
Powerful Pump
High-performance 15-bar pump provides uniform and constant pump pressure making a superior espresso with thick crema.
57oz Water Reservoir
The water tank (capacity 57oz) is located at the back of the unit. It is removable for easy filling and cleaning. You can refill it even when the machine is brewing- simply lift up the stainless steel lid and refill it in place.
Cup Warmer
On the top of the machine is a stainless steel cup warmer with a built-in rail to keep all of your cups secure. The cup warmer is heated using passive heat from the dual thermoblock heating system and is large enough to store and display 10 demitasse cups.
Drip Tray and Grate
Your cups rest on the removable, sturdy stainless steel drip tray grate. The drip tray made of plastic catches spills and it should be cleaned on regular basis. The drip tray and grate prevent drips and spills from reaching your counter top.
Accessories
The Pasquini Livietta T2 comes with a detailed instruction manual, cleaning brush, rubber backflush disc and starter pack of cleaning solution.
|
|
|
|
|
|
|
|
|
