Construction
The body and frame of the Mazzer Mini is constructed of one-piece heavy die cast aluminum. It not only ensures long lasting durability but also cuts down on what little noise the motor does make. The unit measures 17"H x 6 1/4"W x 13 1/4"D and weighs 22.5 lbs.

Automatic Timer
The Mazzer Mini is equipped with a timer control. The timer can be set for up to 60 seconds of continuous grinding. This is also a safety feature as this grinder is nearly silent when running without beans in the hopper.

Heavy-duty Motor and Grinding Burrs
The unit is powered by a 250 watt motor, which spins the grinding burrs at 1600 RPM. The motor is shock-mounted, meaning there will be no vibration. The Mazzer Mini features heavy-duty burr grinding wheels to crush the large quantities of coffee quicker while imparting very little heat to the freshly ground coffee. The cutting wheel is 58mm in diameter and uses high-grade tempered steel for long life.

Stepless Grind Settings
The Mazzer Mini is capable of grinding form very fine (for Turkish coffee or espresso) to very coarse (for French press or drip coffee makers). With stepless grind adjustment system you can adjust the grind as little or as much as you want with ease.

Safety Mechanism
The Mazzer Mini has an overload switch that turns the machine off to prevent any damage due to foreign objects getting stuck in the burrs.

Dosing Grinder with Tamper
The Mazzer Mini is made to be used with virtually any espresso machine. The ground coffee dosing hopper located on the front of the Mini has a capacity of 200 grams or .44 lbs. Rubber coated adjustable dosing lever can deliver 5.5 to 9 grams per pull. A chrome-plated portafilter fork (place where the portafilter rests while you are dosing coffee from the hopper) is located below the dosing hopper. The Mini also features a built-in 54mm coffee tamper that can be mounted on the front of the dosing hopper if you wish.

Compact Coffee Bean Hopper
The latest version of the Mini features the ‘shorter’ hopper - total height is 17" from base to top of the hopper, to fit underneath your kitchen cabinets. The hopper can hold up to 1.3 lbs of coffee beans. It is made of heavy clear plastic with a black lid, so that your coffee beans stay fresh as they are protected from the ambient air. You can remove the bean hopper while it still has coffee beans in it.

Cleaning
To clean the grinding wheels and chamber, simply remove the bean hopper then unscrew (clockwise) the grind adjustment wheel until the assembly is free of the machine. Both the stationary grind surface (upper assembly that you unscrewed) and the spinning grind wheel are exposed. You can use a small brush to clean between the cutting burrs. The bean hopper can be removed and cleaned with warm water and mild detergent by hand. Cleaning of the dosing hopper is achieved best with a small vacuum hose and pulling the dosing lever. Please remember that parts of Mazzer Mini are not dishwasher-safe.

Accessories
The Mazzer Mini comes with a detailed instruction manual, a stainless steel grounds tray and a 54mm tamper.

Please Note: Most Mazzer grinders are tested before they leave the factory, so it’s normal to find coffee grounds in them.