 |
 |
 |
 |
|
 |
|
Features
- Grinder Operation
The grinder is equipped with a stainless steel portafilter holder. Once you put your portafilter in place, it triggers a sensor button that activates the grinding process.
Settings
The E37 has dedicated push-button controls for single and double shots. The grind duration for both buttons are programmable, so you can preset the grinder to deliver the desired volume. The duration of the grinding cycles can be programmed in 0.1 second increments, allowing you to fine-tune grind volume.
In addition, you can also control the grinding process by activating both the single and double-shot buttons to manually start and stop grinder operations.
The E37 has four language options: English, Italian, French and Dutch. It is also equipped with a worn-burr alert that can be turned on or off, as desired.
Dual Automatic-Start Modes
The push-and-grind option is set to start the grind process once your portafilter is in place, pause mid-cycle if the portafilter is removed, and resume the cycle where it left off once the portafilter is back in place. But, you can also use the one-touch mode to automatically grind and dispense coffee, even if the portafilter is not in place; this option is useful if you’re grinding into a storage container.
See-and-Set System
The Ceado E37 is equipped with a See-and-Set system and stepless infinitesimal grind adjustments; you’ll be able to fine-tune the grind by simply sliding the ergonomic handle. Calibration is made easy, as grind selections are clearly visible. The grind settings are accurate and responsive, since this grinder has reduced pitch thread.
Burrs
The 64mm flat burrs are made of durable 6HRC steel. They operate at 1400 rpm to yield precise, consistent results. The burrs are held in place with three screws, for easy access and removal. Unlike most grinders, the E37 does not have to be recalibrated once the burrs are put back into place. Additionally, the burrs have sealed threads to prevent coffee grounds gaining access to and clogging up the threads. This model is outfitted with a worn-burr alert system.
Motor
The E37 is equipped with a 400-watt rectified motor to ensure that the motor shaft and burrs are perpendicular to one another. The motor is mechanically suspended in a specialty shell and rests on rubber mounts for quiet operation.
The E37’s motor has been designed to minimize thermo expansion during the grinding process; the burrs are always kept at the appropriate value and distance, in accordance to the grind setting selected by the user.
Bean Hopper
The E37 has a transparent polycarbonate hopper with a 3.8-pound capacity. The hopper has a large opening for unobstructed access during routine cleaning and maintenance.
Dimensions
6.88”Wx25.20”Hx9.85”D
Weight
26.5lbs
Origin
Italy
|
|
|
|
|
|
|
|
|
